#FANTASY GROUNDS 2 MONNITORS INSTALL#

If there is No Error Message, Select 'No Error Message' Below. After about 45 Seconds, Check for Error Messages on the Topside Panel Display.Press any 'Cool', 'Warm', or 'Temp' Button to Exit Priming Mode.Turn OFF the Power to the System and Turn it back ON again to put System into Priming Mode.Contact your Dealer or Service Organization to check the Switch Numbers or Setting Values Displayed, and Correct as Necessary to Match the Equipment in the Spa System, or Continue for a Detailed Test Procedure. This Error Message indicates that the Dip Switch Numbers Displayed or the Configuration Setting Values Displayed on the Topside Panel, following the 'CFE' Message, are in Conflict with each other. There is a 'Configuration Error' (CFE) in the Dip Switches or Configuration Settings. With the Heat Related Pump Running, wait at Least 2 Minutes for the Correct Actual Water Temperature to be Displayed. Priming Mode has been Exited and the Pump has Not yet run for 1 or 2 Minutes (depending on Model) to Sample Actual Water Temperature. The Actual Water Temperature is 'Unknown' (-).

To read the Current Water Temperature, either Change to Standard Heating Mode or turn On the Heating Related Pump, and wait at least 2 Minutes. The Current Water Temperature is 'Unknown' (- or -) while in Economy or Sleep Mode.Д«etween Filter Cycles, while in the Economy or Sleep Heating Modes, the Pump has not turned ON and the Last Water Temperature is not Current.

Snb, Sb, or SENSOR B SERVICE REQD Message SnA, SA, or SENSOR A SERVICE REQD Message OHH, HH, or HTR TEMP LMT SERVICE REQD Message Safety should ALWAYS be your first consideration!Дr or HEATER MAY BE DRY WILL RETEST SHORTLY MessageДrY, dY, or HEATER DRY SERVICE REQD Message As a responsible adult, always check the control panel display for errors and verify safe water temperature before using a spa, and before allowing children to use a spa. There may be conditions that exist in which the spa control system will be unable to detect these conditions. There is no guarantee expressed or implied that this technology can detect all instances of a real or potential problem with the equipment. DO NOT remove the protective covers from any electrical enclosure, or attempt to service any related electrical device, unless you are a qualified electrician or service professional.

#FANTASY GROUNDS 2 MONNITORS INSTALL#

Failure to properly service or install spa related components can result in serious injury or death.

Any and all servicing should be performed by a licensed spa technician. This information is being provided for information purposes only. This is NOT intended as a service guide or a means for you, as the consumer, to service your equipment in any way. The spa panel messages include common diagnostic messages, operational messages, and various other messages such as reminders. Here are the common spa panel messages that you will encounter with your spa panel.

Fantasy grounds 2 monnitors